Description
ADS-SMOKE is an indoor air quality sensor with analog voltage output 0 – 10 V and an output relay with adjustable switching level. The sensor has a high sensitivity to low concentrations of pollutant gasses in the air. For example carbon monoxide and hydrogen, those are contained in the cigarette smoke. Therefore is the ADS-SMOKE appropriate for use in areas polluted by cigarette smoke. Monitoring of the air pollution allows very economical controlling of ventilation systems. The sensor is also suitable for tentative detection of alcohol vapors, methane/propane-butane/natural gas leak.
| Parameter | Value | Unit |
| Power supply(1) | 230 | VAC |
| Input | 2,5 | VA |
| Switched voltage | max. 250 | VAC |
| Switched current | max. 16 | A |
| Switching hysteresis | 1,5 | V |
| Voltage output | 0 – 10 | VDC |
| Current output 1 | 0 – 20 | mA |
| Current output 2 | 4 – 20 | mA |
| Sensor warm-up(2) | 10 | minutes |
| Working temperature | 0 to +40 | °C |
| Working humidity | 5 to 95 | %RH |
| Storage temperature | -20 to +60 | °C |
| Dimensions | 125x83x37 | mm |
| (1) For the long term stability it is recommended to power the sensor continuously. | ||
| (2) Since power on to warm-up the sensor. The first 10 minutes the output will be 0V. The relay starts to switch after this interval. In the next 24 hours the sensor will stabilize. | ||
